FRT-G2 Series
FRT-G2-200
| Rated torque | 2±0.7-3Nm(20±7gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
FRT-G2-300
| Rated torque | 3±0.8-3Nm(30±8gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
FRT-G2-450
| Rated torque | 4.5±1.0-3Nm(45±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
FRT-G2-600
| Rated torque | 6±1.2-3Nm(60±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
FRT-G2-101
| Rated torque | 10±2.0-3Nm(100±20gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
FRT-G2-200-G1
| Rated torque | 2±0.7-3Nm(20±7gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G1 | Spur gear | Involute | 0.5mm | 20° | 14 | ø7 |
FRT-G2-300-G1
| Rated torque | 3±0.8-3Nm(30±8gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G1 | Spur gear | Involute | 0.5mm | 20° | 14 | ø7 |
FRT-G2-450-G1
| Rated torque | 4.5±1.0-3Nm(45±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G1 | Spur gear | Involute | 0.5mm | 20° | 14 | ø7 |
FRT-G2-600-G1
| Rated torque | 6±1.2-3Nm(60±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G1 | Spur gear | Involute | 0.5mm | 20° | 14 | ø7 |
FRT-G2-101-G1
| Rated torque | 10±2.0-3Nm(100±20gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G1 | Spur gear | Involute | 0.5mm | 20° | 14 | ø7 |
FRT-G2-200-G2
| Rated torque | 2±0.7-3Nm(20±7gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G2 | Spur gear | Involute | 1.0mm | 20° | 10 | ø10 |
FRT-G2-300-G2
| Rated torque | 3±0.8-3Nm(30±8gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G2 | Spur gear | Involute | 1.0mm | 20° | 10 | ø10 |
FRT-G2-450-G2
| Rated torque | 4.5±1.0-3Nm(45±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G2 | Spur gear | Involute | 1.0mm | 20° | 10 | ø10 |
FRT-G2-600-G2
| Rated torque | 6±1.2-3Nm(60±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G2 | Spur gear | Involute | 1.0mm | 20° | 10 | ø10 |
FRT-G2-101-G2
| Rated torque | 10±2.0-3Nm(100±20gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G2 | Spur gear | Involute | 1.0mm | 20° | 10 | ø10 |
FRT-G2-200-G3
| Rated torque | 2±0.7-3Nm(20±7gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G3 | Spur gear | Involute | 0.8mm | 20° | 11 | ø8.8 |
FRT-G2-300-G3
| Rated torque | 3±0.8-3Nm(30±8gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G3 | Spur gear | Involute | 0.8mm | 20° | 11 | ø8.8 |
FRT-G2-450-G3
| Rated torque | 4.5±1.0-3Nm(45±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G3 | Spur gear | Involute | 0.8mm | 20° | 11 | ø8.8 |
FRT-G2-600-G3
| Rated torque | 6±1.2-3Nm(60±10gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G3 | Spur gear | Involute | 0.8mm | 20° | 11 | ø8.8 |
FRT-G2-101-G3
| Rated torque | 10±2.0-3Nm(100±20gfcm) |
|---|
| Damping direction | Bi-Directional |
|---|
| Max rotation speed | 50 RPM |
|---|
| Max cycle rate | 10 cycles/min |
|---|
| Operating temperature | 0 ~ 50°C |
|---|
| Weight | 0.6g |
|---|
| Body and cap material | Polycarbonate (PC) |
|---|
| Rotating shaft material | Polyacetal (POM) |
|---|
| Oil type | Silicone oil |
|---|
| Gear Model | Type | Tooth profile | Module | Pressure angle | Number of Teeth | Pitch circle diameter |
|---|
| G3 | Spur gear | Involute | 0.8mm | 20° | 11 | ø8.8 |
