FRT/FRN-D2 Series
Model |
Rated torque |
Damping direction |
Max rotation speed |
Max cycle rate |
Operating temperature |
Weight |
Body & cap material |
Rotating shaft material |
Oil type |
FRT-D2-501
|
50±10Nm (500±100gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
FRT-D2-102
|
100±20Nm (1000±200gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
FRT-D2-152
|
150±30Nm (1500±300gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
FRT-D2-R501
|
50±10Nm (500±100gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-L501
|
50±10Nm (500±100gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-R102
|
100±20Nm (1000±200gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-L102
|
100±20Nm (1000±200gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-R152
|
150±30Nm (1500±300gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-L152
|
150±30Nm (1500±300gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
FRT-D2-501-G2
|
50±10Nm (500±100gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-102-G2
|
100±20Nm (1000±200gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-152-G2
|
150±30Nm (1500±300gfcm) |
Both |
50 RPM |
10 cycles/min |
0 - 50°C |
8.3g |
Polycarbonate (pc) |
Polyacetal (POM) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-R501-G2
|
50±10Nm (500±100gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-L501-G2
|
50±10Nm (500±100gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-R102-G2
|
100±20Nm (1000±200gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-L102-G2
|
100±20Nm (1000±200gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-R152-G2
|
150±30Nm (1500±300gfcm) |
Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |
FRT-D2-L152-G2
|
150±30Nm (1500±300gfcm) |
Counter-Clockwise |
50 RPM |
10 cycles/min |
0 - 50°C |
11.8g |
Polycarbonate (pc) |
Metal (SUS) |
Silicone oil |
Gear model |
Tooth Profile |
Module |
Pressure angle |
Number of teeth |
pitch circle diameter |
Addendum modification coefficient |
G2 |
involute |
1.0 |
20° |
12 |
ø12 |
+0.375 |